Post Card – Magnetic Photo Frame

Description

A tiny window to anywhere. This postcard-style frame brings a travel vibe to your fridge and keeps your favorite memory stamped in place.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Instax Mini – Monocolor – 40 Minutes*  (may vary according to your printer model)
                                                    Multipart – 56 Minutes*  (may vary according to your printer model)
                                                    Multicolor – 53 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
                                Polaroid 600 – Monocolor – 57 Minutes*  (may vary according to your printer model)
                                                        Multipart – 01 Hour 12 Minutes*  (may vary according to your printer model)
                                                        Multicolor – 01 Hours 20 Minutes*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
• Approximately Frame Dimensions: Instax Mini – 9,5 x 6,3 cm
  Polaroid 600 – 11 x 9,5 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

ATTENTION: “Multipart” files requires super glue.

You Will Need: 5 mm x 3mm Neodymium Magnets – Mercado Livre | Aliexpress | Amazon

Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.16 mm
• Recommended Layer Height:  0.16 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Grid)
• Needs Support: No.
• Build Plate Adhesion: No.